best overclock on an fx 8320e with a cm hyper 212 evo

This will help you stabilize the overclock with less of a vcore bump. so you'll likely be able to increase the cpu frequency pretty far before you need to touch voltages.Īlso make sure you have your LLC set to its most aggressive profile. The 83xx lineup of cpus generally can get up to 4.0-4.4 ghz on stock voltage. if you crash when the cpu gets close to that number it's highly likely you hit your thermal max for that cpu and will have to back the overclock down a little. If your temps start to inch up close to 70C you'll be approaching the thermal max for your cpu. Its also one of the best overclocking CPUs around, easily reaching 5 GHz when properly cooled. While the i3 does have better single threaded performance and four threads, you cant really argue with an octa-core, unlocked CPU for the same price. Your ddr3 1600 ram has a frequency of 800. AMD FX-8320: At just 140, this 8-core behemoth costs as much as a dual core Intel i3. you'll want your northbridge frequency to be about x3 the ram frequency for max stability. if the computer hard freezes, crashes out of prime back to the desktop, black screen restarts you know you'll need to play more with the vcore.Īs a small suggestion. once you're able to load into windows, run prime95. The quick and dirty would be to bump the cpu multiplier till it won't load into windows anymore. i also have some solid experience with overclocking bulldozer/piledriver. i actually have that motherboard so i've been getting pretty familiar with the bios. So is this right or should I reset and start over just upping the multiplier to 20? I have run Prime95 and Max temps were 55C with no failures after 15 min or so. Now my question is should I have all these settings or just upped the multiplier and not touched the other settings. The Core C6 State I left Enabled, HPC Mode Disabled, and APM Master Mode Auto. In the CPU Configuration I Disabled Cool N Quiet, C1E, and SVM.

I also manually put in the CPU Voltage and CPU/NB Voltage to the stock listed Voltage of 1.38 and 1.225. I found a walk through video on you tube that gave me a good idea of what settings to have but I want to make sure. I currently am running FX 8320 on M5A990X EVO with CM Hyper 212 EVO. Hello I am rather new to Manual Overclocking.

Best overclock on an fx 8320e with a cm hyper 212 evo